NEC iLO 5 - Page 200

194
Password and Confirm Password values.
5. Select from the following privileges:
• Login
• Remote Console
• Virtual Power and Reset
• Virtual Media
• Host BIOS
• Configure iLO Settings
• Administer User Accounts
• Host NIC
• Host Storage
• Recovery Set
6. To select all available user privileges, click the select all check box.
7. To save the user account changes, click Update User.
Deleting a user account
Prerequisites
Administer User Accounts privilege
Procedure
1. Click Administration in the navigation tree. The User Adminisration tab is displayed.
2. Select the check box next to one or more user accounts that you want to delete.
3. Click Delete.
4. When prompted to confirm the request, click OK.
iLO user account options
• User Name appears in the user list on the User Administration page. It does not have to be
the same as the Login Name. The maximum length for a user name is 39 characters. The
User Name must use printable characters. Assigning descriptive user names can help you to
identify the owner of each login name.
• Login Name is the name you use when logging in to iLO. It appears in the user list on the
User Administration page, on the iLO Overview page, and in logs. The Login Name does
not have to be the same as the User Name. The maximum length for a login name is 39
characters. The login name must use printable characters.
• Password and Password Confirm set and confirm the password that is used for logging in
to iLO.