203
to the Virtual Floppy/USB key and Virtual CD/DVD-ROM text at the top of the page.
2. To move a device up or down in the boot order, select the device in the Server Boot Order
list, and then click Up or Down.
In Legacy BIOS mode, select from the following devices:
• CD/DVD Drive
• USB Storage Device
• Hard Disk Drive
• Network Device <number>, where the server Ethernet card and additional
NIC/FlexibleLOM cards are Network Device 1, Network Device 2, Network Device 3, and
so on.
In UEFI mode, select an option from the list of available boot devices.
3. Click Apply.
iLO confirms that the boot order was updated successfully.
To Next Page
Loading...
