309
Solution 2
Cause
A connected Virtual Media session is being used to perform a continuous copy operation. The
continuous copy operation takes priority and, consequently, the .NET IRC loses synchronization.
Eventually, the Virtual Media connection resets multiple times and causes the USB media drive
for the OS to lose synchronization with the Virtual Media client.
Action
• Reconnect to the .NET IRC and the Virtual Media.
• Reset iLO.
iLO .NET IRC failed to connect to server
Symptom
iLO displays the message Failed to connect to server when it attempts to establish a .NET
IRC session.
Solution 1
Cause
The network response is delayed. The iLO .NET IRC client waits a specified amount of time for a
connection to be established with iLO. If the client server does not receive a response in this
amount of time, it displays an error message.
Action
2. Correct the network delay and retry the .NET IRC connection.
Solution 2
Cause
A Shared Remote Console session is requested, but the session leader delayed sending an
acceptance or denial message. The iLO .NET IRC client waits a specified amount of time for a
connection to be established with iLO. If the client server does not receive a response in this
amount of time, it displays an error message.
Action
3. Contact the .NET IRC session leader and retry the request, or use the Remote Console
acquire feature.
File not present after copy from server to iLO Virtual Media USB key
Symptom
If you copy files from a target server to an iLO virtual drive, the files are not visible in Windows
To Next Page
Loading...
Need help?
General