326
configured as primary (master), the other as secondary (slave), each SATA drive is
connected to its own interface.
System Insight Display (SID) is an optional product that can indicate the statuses of
each device on motherboard.
Stateless address autoconfiguration.
Systems Management Architecture for Server Hardware.
System Management Software.
Simple Network Management Protocol.
Simple Network Time Protocol.
Standard Program Package (SPP) is a software package that includes BIOS, FW, driver,
and other basic software. SPP is included in Starter Pack.
Smart Storage Administrator (SSA) is a utility that can configure RAID arrays. SSA is
provided for Windows/Linux and can also start from F10 key function.
A software package that includes SPP, instruction manual, application, and other
software for the server. This must be installed before using OS on the server. Starter
Pack is provided as an optional product and ISO data on our website.
System
Maintenance
Switch
A DIP switch on motherboard. This switch can enable/disable initialization, password,
iLO settings, and other functions of maintenance.
System Utilities is a built-in utility that provides system information, calling RBSU,
collecting system log, and other system utilities. You can start System Utilities by F9
key during POST.
Transport layer security.
An optional product of Trusted Platform Module for the server.
Unified Extensible Firmware Interface.
Universal Host Controller Interface.
Uninterruptible Power Supply.
Universal serial bus. A serial bus standard used to interface devices.
User-based Security Model.
Coordinated Universal Time.
Universally unique identifier.
To Next Page
Loading...
