34
• To filter by class, select a class from the Class list.
• To filter by event category, select a value in the Category list.
• To change the displayed date and time for events, select a value in the Time menu. Choose
from the following:
◦ Show Default—Display UTC time.
◦ Show Local Time—Display the iLO web interface client time.
◦ Show ISO Time—Display UTC time in ISO 8601 format.
In iLO 5 Firmware Version 1.10 Jun 07 2017, when SNTP setting is not configured or when it
is not used in an environment where can be synchronized with the time server, the following
times are displayed.
If Show Default and Show ISO Time are selected, the following is displayed.
System time(UTC±Time Zone) displayed in BIOS/Platform Configuration(RBSU)
If Show Local Time is selected, the following is displayed.
Added to the System time(UTC±Time Zone) displayed in BIOS/Platform
Configuration(RBSU) and the time zone of the environment of the client connected to
iLO.
In iLO 5 Firmware Version 1.15 Aug 17 2017, when SNTP setting is not configured and Time
Format on BIOS/Platform Configuration(RBSU) is Local Time, the following times are
displayed.
If Show Default and Show ISO Time are selected, the following is displayed.
System time(UTC±Time Zone) displayed in BIOS/Platform Configuration(RBSU)
If Show Local Time is selected, the following is displayed.
Added to the System time(UTC±Time Zone) displayed in BIOS/Platform
Configuration(RBSU) and the time zone of the environment of the client connected to
iLO.
• To filter by the Last Update date, select a value in the Last Update menu.
Based on the time displayed in Show Default, the filter will be applied.
• To set the filters back to the default values, click Reset filters.
Searching for an event
To search for events based on dates, event IDs, or description text, click , and then enter
text in the search box.
Marking an IML entry as repaired
Use this feature to change the status of an IML entry from Critical or Caution to Repaired.
Prerequisites
To Next Page
Loading...
Need help?
General