48
protection in a single memory board.
• Advanced ECC—The system can be configured for Advanced ECC.
• Mirroring—The system can be configured for mirrored AMP.
• On-line Spare—The system can be configured for online spare AMP.
• LockStep—The system can be configured for LockStep AMP.
• Online Spare (Rank Sparing)—The system can be configured for Online Spare Rank AMP.
• Online Spare (Channel Sparing)—The system can be configured for Online Spare Channel
AMP.
• Intersocket Mirroring—The system can be configured for mirrored intersocket AMP
between the memory of two processors or boards.
• Intrasocket Mirroring—The system can be configured for mirrored intrasocket AMP
between the memory of a single processor or board.
• None—The system cannot be configured for AMP.
Memory Summary
The Memory Summary section shows a summary of the memory that was installed and
operational at POST.
Location
The slot or processor on which the memory board, cartridge, or riser is installed. Possible values
follow:
• System Board—There is no separate memory board slot. All DIMMs are installed on the
motherboard.
• Board <Number>—There is a memory board slot available. All DIMMs are installed on the
memory board.
• Processor <Number>—The processor on which the memory DIMMs are installed.
• Riser <Number>—The riser on which the memory DIMMs are installed.
Number of Sockets
The number of present memory module sockets.
Total Memory
The capacity of the memory, including memory recognized by the operating system and memory
used for spare, mirrored, or XOR configurations.
Operating Frequency
The frequency at which the memory operates.
Operating Voltage
The voltage at which the memory operates.
To Next Page
Loading...
Need help?
General