68
Firmware details
The Installed Firmware page displays the following information for each listed firmware type:
• Firmware Name—The name of the firmware.
• Firmware Version—The version of the firmware.
• Location—The location of the component that uses the listed firmware.
Replacing the active system ROM with the redundant system ROM
Prerequisites
• The server supports redundant system ROM.
• Virtual Power and Reset privilege
Procedure
1. Click Firmware & OS Software in the navigation tree.
2. On the Firmware tab, click the swap icon next to the Redundant System ROM details.
iLO prompts you to confirm the request.
3. Click OK.
The change will take effect after the next server reboot.
To Next Page
Loading...
Need help?
General