NEC UNIVERGE SV7000 - Command Relationships

– 290 –
CHAPTER 6 COMMANDS AND JOB SPECIFICATIONS
2.1 Command Relationships
Each command consists of a name (four to six alphanumeric characters) which suggests its function and
the parameters required for its execution. Table 6-3 describes the correspondence among the ACD and
Node commands. Each ACD command may involve the assignment or execution of Node commands and/
or other ACD commands.
Each command description includes a section entitled “Assignment and Deletion Procedure” which de-
scribes the correct sequence for applying related commands.
Table 6-2 Related Commands
Command Name
Related Node
(Non-FCCS)
Commands
Related Node FCCS
Commands
Related ACD Commands
ACDTN ASYD, ANPD, ASPA, AADT
ASYD, ANPD, ASPAN,
AADTN
ACDCOM, ACDSPL,
ACDCCV
ACDSPL ACDTN
ACDLOG ACDTN, ACDSPL, ACDPSN
ACDPSN
AEFR, ASFC, ASDT/AISTL,
AKY1, ARSC
AEFR, ASFC, ASDT/AISTL,
AKY1, ARSCN
ACDSPL, ACDHS, ACDWS,
ACDHC, ACDTN
ACDCCV AADT, ASDT/AISTL AADTN, ASDT/AISTL
ACDSPL, ACDHS, ACDWS,
ADCHC, ACDTN
ACDPLT AMNO, ACNO, ASAT AMNON, ACNON, ASATN ACDTN, ACDCCV, ACDWS
ACDTG ACDTN
ACDANA AMNO AMNON ACDPSN
ACDIVR ASDT/AISTL, ASHU ASDT/AISTL, ASHUN ACDTN
ACDHS
ACDHSP
ACDTN, ACDWS, ACDHC,
ACDHCP, ACDCCV
ACDHSE
ACDTN, ACDWS, ACDHC,
ACDHCE, ACDCCV
ADCHC
ACDHCP
ACDTN, ACDHS, ACDHSP
ACDHCE ACDTN, ACDHS, ACDHSE
ACDWS ACDTN, ACDCCV, ACDPLT
Total ACD
System
ASYD (R), ASDT/AISTL (R),
AOKC (R), ARSC (R),
ASFC (R), AKY1 (R),
AMNO (R), ACNO (O),
AEFR (R), AADT (O),
ASHU (O), SPDL (R),
ASAT (R), ROAI (O)
ASYD (R), ASYDL (R),
ASDT/AISTL (R), AOKC (R),
ARSCN (R), ASFC (R),
AKY1 (R), AMNON (R),
ACNON (O), AEFR (R),
AADTN (O), ASHUN (O),
SPDL (R), ASATN (R),
ROAI (O)
ACDTN (R), ACDSPL (R),
ACDLOG (O), ACDPSN (R),
ACDCCV (R), ACDPLT (R),
ACDTG (R), ACDANA (O),
ACDIVR (O), ACDHS (O),
ACDHC (O), ACDWS (O)
(R) = Required, (O) = Optional