– 342 –
ACDHCE : Assignment of ACD Holiday Calendar for type of reception services
ACDHCE: Assignment of ACD Holiday Calendar for type of reception ser-
vices
1. Function
This command is used to assign, display, print, and remove Holiday Calendar information for the type of
reception services. A Holiday Schedule only applies to pilot numbers that are using a Week Schedule
(ACDPLT CCV/W=1). Holiday information includes a month and day entries and numbers that refer to the
Holiday Schedule to be used on that day. An unlimited number of days may be scheduled as holidays, and
up to 255 different holiday schedules can be programmed. Holidays can be programmed up to one calendar
year in advance.
2. Precautions
(1) When holiday schedules are already assigned, remove it by using ACDHCE or ACDHSE command.
(2) Holidays can be entered for any day of the year.
(3) A separate Holiday Calendar is available for each tenant.
3. Parameters
ACDP: Fixed to 0 (Not used)
WEEKNO: Week Schedule Number (1-250)
MONTH: Month (1-12)
DAY: Day (1-31)
SCH: Schedule Number (0-255)
Note 1 Note 2
Note 1:
SCH corresponds to SCH that is assigned by ACDHSE.
Note 2: When assigning SCH = “0”, ACDWS becomes effective, which indicates WEEK of ACDWS related to
WEEKNO assigned by ACDPLT will be used.
Holiday schedule: Holiday Calendar information on a Pilot Number basis
Holiday schedules on a Pilot Number basis
To Next Page
Loading...
