NEC UNIVERGE SV7000 - Installation of MIS

– 36 –
CHAPTER 3 INSTALLATION
3.1.3 Installation of MIS
Figure below shows the cable connection between the MIS and the Telephony Server.
Figure 3-9 Cable Connection between MIS and Telephony Server
Client MIS Client MIS Client MIS Client MIS
Server MIS
Host
IVR
100 BASE-TX (Straight)
100 BASE-TX (Straight)
100 BASE-TX (Straight)
100 BASE-TX (Straight)
Switching HUB
Swiching HUB
Router
POWERPOWER
LAN1
Note: When the client MIS and IVR/Host are installed in a system together, LAN network for these terminals
should be separated by the router.