– 68 –
CHAPTER 4 OFFICE DATA DESIGN
Note 2: Monday’s table starts from “00:02”. Others start from “00:00”.
The following shows conditions for using this feature.
1. This feature is not available and ACDHCP/ACDHSP command cannot be used.
2. When this feature is set, Schedule Number (WEEKNO) that is assigned by ACD Pilot number will relate
to the following:
• SCH of Week Schedule Data [ACDWS]
• WEEKNO of Holiday Calendar Data (pilot basis) [ACDHCP]
• WEEKNO of Holiday Schedule Data (pilot basis) [ACDHSP]
Therefore, when assigning the data, consideration should be given to the whole schedule. The following exam-
ples show the relationship between each command.
To Next Page
Loading...
