NEC UX5000 - One-Touch Calling; Direct Station Selection

One-TouchCalling
Page-96
One-Touch Calling
One-TouchCalling,usingaProgrammableFunctionKey,allowsforonebuttonaccesstoco-workers,out-
sidelinesandselectedUX5000features.You'llfindthisagreattimesaverwhencallingtheclientsandco-
workersyoutalktomostoften.Insteadofdialingthecodes,justpresstheOne-TouchKey.
YourOne-TouchKeysgiveyou:
• DirectStationSelection-Onebuttonaccesstoyourco-worker'sextensions.
• PersonalSpeedDial(OutsideCalling)-Onebuttonaccesstooutsidelines,linegroupsand
telephonenumbers.(YoucanalsohavePersonalSpeedDial.)
• AbbreviatedDialing-OnebuttonaccesstoCommonandGroupAbbreviatedDialingbins.
• ServiceCodes-OnebuttonaccesstoServiceCodes(e.g.,2forCallback).
• ChainDialing-LinkingtwoormoreOne-T
ouchProgrammableFunctionKeysforlengthydialing
scenarios.
Forone-touchoperationtothesefunctions,defineaProgrammableFunctionkey.Refertothe
operationonpage100.
Direct Station Selection
To program a Bin for Direct Station Selection (extension) calling:
1. CALL1+855.
2. Dialthebinnumber(1-9,0)youwanttoprogram.
3. Dialextensionnumberyouwantassignedtothatkey+HOLD.
4. Enterthenameassociatedwiththebinyouareprogramming(seeNameStoringonpage90)+HOLD.
Ifyourterminalisanon-displayterminal,simplypressHOLD.
5. SPKtohangup.