NEC UX5000 - Forced Trunk Disconnect

ForcedTrunkDisconnect
Page-63
Forced Trunk Disconnect
ForcedTrunkDisconnectenablesyoutodisconnect(release)anotherextension'sactiveoutsidecallifyou
needtousetheirline.Youcanthenplaceacallonthereleasedline.
To disconnect a busy trunk:
1. PressLINEforthebusytrunk.
OR
Dialtrunkaccesscode(e.g.,# 9+trunknumber).
2.
* 3.
YouhearconfirmationbeepsastheUX5000disconnectstheline.Youcannowplaceacallon
thefreeline.
3. SPKtohangup.
C A U T I O N
ForcedTrunkDisconnectabruptlyterminatestheactive
callontheline.Youshouldusethisfeatureonlyinan
emergencyandwhennootherlinesareavailable.