NEC UX5000 - Handsfree and Monitor

HandsfreeandMonitor
Page-67
Handsfree and Monitor
Whenit'sinconvenienttoholdthehandset,youcanusethespeakerandmicrophoneinyourterminaland
talkHandsfreeinstead.Handsfreeisgreatwhenyoudon'thaveafreehandfortheterminal.(Forexample,
youmaywanttoenterdataatacomputerwhiletalkingtoacustomerontheterminal.)
TherearethreetypesofHandsfreeoperation:
• Handsfree-YoucanplaceandanswercallsbypressingSPKinsteadofusingthehandset.
• AutomaticHandsfree-Youcanpressalineorlineappearancekeywithoutfirstliftingthehand-
setorpressingSPK.YourCommunicationsManagermayhaveenabledthisoptionforyou.
• Monitor-Youcanplaceacallwithoutliftingthehandset,butyoumustliftthehandsettospeak.
Youalwayshavethisoption-regardlessofthetypeofterminalyouhaveorhowyourUX5000is
setup.
To talk Handsfree:
1. SPKorCALL1orLINE.
2. Placecall.
3. Speaktowardterminalwhencalledpartyanswers.
To change a handset call into a Handsfree call:
1. SPKandhangupthehandset.
2. SPKtohangupwhenyouaredone.
To change a Handsfree call into a handset call:
1. Lifthandset.