NEC UX5000 - Call Redirect

CallRedirect
Page-21
Call Redirect
CallRedirectallowsyoutotransferacalltoapre-defineddestination(suchasanoperator,voicemail,or
anotherextension)withoutansweringthecall.Thiscanbeusefulifyouareonacallandanotherringsinto
yourextension.BypressingtheCallRedirectkey,thecallistransferred,allowingyoutocontinuewithyour
currentcall.
Thefollowingtypesofcallscannotberedirectedwiththefeature:
• ACD
• DoorBox
• Transferred
• VirtualExtension
• DepartmentGroup(allringmode)
Thepre-defineddestinationhastobeanextensionnumberorvoicemailpilotnumber.
To redirect a ringing call:
1. Withanincomingcallringingyourextension,pressFUNCTION(CallRedirect)withoutliftingthehanset
orpressingtheCALLkeys.
Aconfirmationtoneisheardovertheterminal'sspeaker.
AfterpressingtheCallRedirectkey,thecallwillnotrecalltheextension.