NEC UX5000 - DSS Console

DSSConsole
Page-58
DSS Console
Ifyoudoalotofcallprocessing(likeanoperatorordis-
patcher),youmayhaveeithera60-ButtonDSSCon-
soleor16-ButtonDirectLineSelection(DLS)Console.
TheDSSConsolegivesyouaBusyLampField(BLF)
andone-buttonaccesstoextensions,trunksandcertain
UX5000features.UsetheDSSConsoletohelpyou:
• CallExtensionsandDoorBoxes
• Place,answerandTransferoutsidecalls
• MakeInternalorExternalPages
• SwitchtheNightServicemode
• ActivateDSSConsoleAlternateAnswer(i.e.,
redirectyourcallstoanotherDSSConsole)
YourDSSConsolemayalsohavekeysstoredwithdial-
ingcodesorProgrammableFunctionKeyoperations.
ThisgivesyourDSSConsolemanyofthefeaturesavailableonfunctionkeys.CheckwithyourCommuni-
cationsManagertoseeifyourconsolehasthesefunctions.
To call an extension from your DSS Console:
1. Withthe60-buttonconsole,asecondrangeisavailablewithaFUNCTION(PageSwitch)key.Ifdefined,
pressthiskeytoselecttherange.
2. PressDSSConsolekey.