NEC UX5000 - Group Listen

GroupListen
Page-66
Group Listen
UseGroupListenwhenyouwantothersinyourofficetolisteninonyourcall.Whileyoutalkonthehand-
set,yourcaller'svoicebroadcastsoveryourterminal'sspeaker.GroupListenautomaticallyturnsyour
Handsfreemicrophoneoffsoyourcallercannotheartheconversationinyouroffice.
To initiate Group Listen:
1. Placeoranswercallusingthehandset.
2. SPKtwice(butdonothangup).
SPKflashesslowly.
Youcantalktothecallerthroughyourhandset.Yourco-workershearyourcaller'svoiceover
yourterminal'sspeaker.
WhenyoupressSPKonce,youturnyourSpeakerphoneonandyourhandsetoff.Thesecond
pressturnsonGroupListen.
To talk Handsfree after initiating Group Listen:
1. HangUphandset.
YoumusthaveaspeakerphoneforHandsfreeoperation.
To cancel Group Listen (without hanging up your call):
1. Donothangup+PressflashingSPK.
Youcantalktoyourcalleroveryourhandset.Yourco-workerscannolonger hearyourcaller's
voice.