NEC UX5000 - Headset Operation

HeadsetOperation
Page-68
Headset Operation
TogetevenmorefreedomandconveniencethanwithHandsfree,purchaseaHeadsetandconnectitto
yourterminal.Inadditiontohavingyourhandsfreeforotherwork,you'llhaveprivacyonacallthatisnot
availablewithHandsfree.WithaHeadsetinstalled,eitherthehandsetorHeadsetcanbeusedforcalls.
To enable the headset:
1. Plugintheheadsetintotheheadsetjackonthebottomoftheterminal.
To use the headset:
1. PressFUNCTION(Headset)thenpressLINEtomakeanoutsidecall.
OR
PressFUNCTION(Headset)togetIntercomdialtone.
OR
Ifonacall,FUNCTION(Headset)tohangup.
Theheadset
FUNCTIONkeylightswhenyouenabletheheadsetmode.
Youcanstillreceiveandrespondtovoice-announcedIntercomcallswithaheadsetconnected
totheterminal.
Whentheuserissetupforringingthroughtheheadset,thehandsetshouldnotbeused.Itis
recommendedtoonlyusetheheadsetinthiscase.