NEC UX5000 - Secure Set Relocation

SecureSetRelocation
Page-134
Secure Set Relocation
Needtoswapyourterminal'sprogrammingwithanotherterminal?UsingSecureSetRelocation,youcan
swapmostofyourterminal'sprogramming.However,user-definedprogramming,suchasCallForwardset
up,SelectableDisplayMessaging,etc.)willnotbeswapped.Inaddition,thefollowingitemsarecleared: 
CampOn,LastNumberRedial,SavedNumberClear,IncomingHistory,andCommonCancellingofSer-
viceCodes.Thisfeaturewillnotworkforvirtualextensions.
To swap your extension data using Secure Set Relocation:
Theextensionstobeswappedmustbeidlewhiletheswapisperformed,oran"Invalid"error
messagewillbereceived.
1. Fromoneoftheterminalswhichistobeswapped,dialtheExtensionDataSwapservicecode.
AskyourCommunicationsManagerforthiscode.
Ifawarningtoneorerrormessageisheard,thepasswordforthisfeatureisnotset-checkwith
yourCommunicationsManager
.
2. Dialthe4digitpassword.
Ifanincorrectpasswordisentered,awarningtoneisheard.
3. Dialtheextensionnumberwhichistobeswapped.
Aconfirmationtoneisheardiftheswapiscompleted.
Ifitisnotpossibletoswaptheextensiondata,awarningtoneisheard.