NEC UX5000 - Trunk Queuing and Camp on

TrunkQueuingandCampOn
Page-148
Trunk Queuing and Camp On
Whenyoutrytoplaceanoutsidecallandhearbusytonefromyourowncommunicationsserver,youdon't
havetohangupandtryagainlater.UseTrunkQueuingtoleavearequestforthebusylinetocallyou
whenit'sfree.JustanswerwhenTrunkQueuingringsyoubackanddialyourcallagain.Ifyouprefer,use
TrunkCampOntowaitforthebusylinewithouthangingup.WithTrunkCampOn,you'llbeabletousethe
linethemomentit'savailable.
To queue for a busy line:
1. Trytoaccessoutsideline.
Listenforbusytone.
2. 2orFUNCTION(TrunkQueuing).
3. HanguptoleaveaTrunkQueuingrequest.
OR
Waitwithouthangingupforthelinetobecomefree.
To answer when Trunk Queuing calls you back:
1. LifthandsetorSPK.
To cancel a Trunk Queuing request:
1. CALL1+8 7 0+SPKtohangup.