NEC UX5000 - Room Monitor

RoomMonitor
Page-128
Room Monitor
UseRoomMonitorwhenyouwanttolistentothesoundsinanotherworkarea.Forexample,RoomMoni-
torcouldletyoulistentothesoundsinthewarehousewhenit'sleftunattended.YoujustsetupaRoom
Monitorwithaterminalinthewarehousearea.

YoumustactivateRoomMonitoratyourterminalandattheterminalyouwanttomonitor.Youcanonly
monitoroneterminalatatime.Inaddition,RoomMonitorisforlisteningonly(i.e.,youcannottalktothe
monitoredextension).
To activate Room Monitor (at your own terminal):
1. DonotlifthandsetorpressSPK.
2. FUNCTION(RoomMonitor)+Extensionyouwanttomonitor.
TheRoomMonitorkeyflashes.
To activate Room Monitor (at the terminal you want to monitor):
1. DonotlifthandsetorpressSPK.
2. FUNCTION(RoomMonitor)+Yourownextensionnumber.
TheRoomMonitorkeyflashes.
To cancel Room Monitor (at both terminals):
1. FUNCTION(RoomMonitor).
TheRoomMonitorkeygoesout.
Ifthemonitoredterminalisleftactive,thefeaturecanbereactivatedbythemonitoring
terminalbysimplypressingtheRoomMonitorkeyanddialingtheextensionnumber.