NEC UX5000 - Voice over

VoiceOver
Page-159
Voice Over
Ifyouneedtogetthroughtoaco-workerbusyonanothercall,pressyourVoiceOverkey.AftertheVoice
Overalerttoneendsyoucantalktoyourbusyassociate.Theycanrespondtoyouwithouttheirinitial
callerhearing.Yourco-workercanevenswitchbackandforthbetweenyouandtheirinitialcall.YourVoice
Overkeyshowsthefeature'sstatus:
Forotherwaystogetthroughtoabusyco-worker,seeCallWaiting(page23),Callback(page24),Off
HookSignaling(page94),MessageWaiting(page84)andVoiceMail(page149).
Bleedover(theoutsidecallerhearstheV
oiceOver)canoccurwiththehandset,
speakerphone,orheadset.
To initiate a Voice Over to a busy co-worker:
YoucanonlyleaveaVoiceOverifyouheartwoOffHookSignalingtonesorring-busy.
1. FUNCTION(VoiceOver)or6.
YouheartheVoiceOveralerttoneandyourVoiceOverKeyflashes.Youcantalkto
yourco-workerafterthealerttoneends.
Whenthekeyis... Youare...
Off NotusingVoiceOver
Flashing(red) Listeningtotheinterruptingparty
On(green) Respondingtotheinterruptingparty