NEC UX5000 - Calling Your Mailbox

VoiceMail
Page-152
Calling Your Mailbox
To call your mailbox:
1. FUNCTION(VoiceMail).
OR
CALL1+* 8.
OR
PressVMsg
2. (Optional)Afteranswer,dialsecuritycode.
AskyourCommunicationsManagerforyoursecuritycode.
IfyouhaveafixedMWkey,presstheMWkeytodisplaythenumberofvoicemailmessages.
To log into your mailbox from a co-worker’s terminal:
1. PressCALL1+thevoicemailmasternumber(normally700).
2. Dialyourownextensionnumber.
IfyoushareaGroupMailboxwithco-workers,pressingtheVoiceMailkeyonyourterminalor
theirterminallogsyouintothesamesharedmailbox.
From outside, to log onto your mailbox after calling your company’s
Automated Attendant:
1. Press#(forremotelogon)+Dialyourownextensionnumber.
Fromoutside,tologontoyourmailboxifyouhaveadirectlinetoyourterminal:
(Thisrequirescustomprogrammingandyourterminalmustbeforwardedtovoicemail.)
2. Whenvoicemailpicksup,waitforyourgreetingtostart.
3. Press#tostopthegreeting.
4. Press#andyourownextensionnumber.