NEC UX5000 - Default UX Mail Configuration

CallForwardFollowMe
Page-19
Call Forward Follow Me
Whileyouareataco-worker'sdesk,youcandirectyourcallstoyourco-worker'sextension.UseCallFor-
wardFollowMeifyougetdetainedwithyourco-workerlongerthanexpected.Insteadofringingyourown
terminalunanswered,yourcallswillringyouwhereyouare.(Toreroutecallsfromyourownextension,use
CallForwardingonpage16.)
To activate Call Forward Follow Me:
1. CALL1+*2.
OR
FUNCTION(CallForwardtoStation).
2. 3+Dialyourownextensionnumber(i.e.,thesource).
3. DialCallForwardingtype:
2=Allcalls
3=Outsidecallsonly
4=Intercomcallsonly
4.
SPKtohangup(ifyoudialedinstep1).
YourCallForwarding(Station)ProgrammableFunctionKeyflasheswhenCallForwardingis
activated.
To cancel Call Forward Follow Me:
1. CALL1+*2.
OR
FUNCTION(CallForwardtoStation).
2. 0.
3. SPKtohangup(ifyoudialed*2instep1).
YourCallForwarding(Station)ProgrammableFunctionKeygoesout.