NEC UX5000 - Selectable Ring Tones

SelectableRingTones
Page-137
Selectable Ring Tones
Ifyouworkinanareawhereyourextensionisclosetoothers,youmaywanttocustomizethewaycalls
ringyourterminal.Thiswillhelpyoudifferentiatecallstoyourextensionfromcallstootherextensions.
To change your extension’s incoming ring tones:
1. CALL1+8 2 0.
2. 1tosetIntercomringor2tosetoutsidelinering.
TransferredcallsusetheIntercomringtoneyouselect.
3. Dialcodefortheringpatternyouwant(tones1-8).
4. SPKtohangup.
To listen to incoming ring choices:
1. CALL1+8 1 1.
2. 1tolistentoIntercomringor2tolistentooutsidelinering.
Foroutsidelinering,enterthetoneyouwanttolisten.
3. Dialcodefortheringpatternyouwanttohear(tones1-8).
4.
SPKtohangup.