NEC UX5000 - Page 142

SelectableDisplayMessages
Page-136
To select a message:
1. CALL1+* 4.
OR
FUNCTION(CallForwardtoDevice).
2. 3+Messagenumber(01-20).
UseVOL DOWNandVOL UPtoscrollthroughthemessages.
3. (Optionalformessages1-8and10)Dialthedigitsyouwanttoappendtothemessage.
Youcanappendmessages1-8and10withdigits(e.g.,thetimewhenyouwillbeback).
Youenterthetimein24-hourformat,butitdisplaysin12-hourformat.
4. SPKtoselectmessageandhangup(ifyoudialed*4instep1).
DependingonUX5000programming,DNDmaybeactivatedwiththisfeature.Youcanallow
callstoringthru(displayingthemessagetoICMcallers)bycancellingDND(pressDND+0).
To cancel a message:
1. CALL1+* 4.
OR
FUNCTION(CallForwardtoDevice).
2. 3.
3. SPKtohangup(ifyoudialed* 4instep1).