NEC UX5000 - Memo Dial

MemoDial
Page-83
Memo Dial
Whileonanoutsidecall,useMemoDialtojotanumberdowninyourterminal'smemory.MemoDialislike
anotepad.Forexample,ifyoudialDirectoryAssistanceandaskforanumber,youcanuseMemoDialto
rememberit.YoucanthenquicklycallthestoredMemoDialnumberafteryouhangup.
To store a number while on a call:
1. FUNCTION(MemoDial)+Dialnumberyouwanttostore+FUNCTION(MemoDial).
Continuewithconversation.
2. SPKtohangupwhenyouaredone.
To call a stored Memo Dial number:
1. Donotliftthehandset+FUNCTION(MemoDial).
2. CALL1.
Thestorednumberdialsoutonlyifyoustoreatrunkaccesscodebeforethenumber.
OR
LINE.
Thestorednumberdialsout.
To check the stored Memo Dial number:
1. Donotliftthehandset+FUNCTION(MemoDial).
Thestorednumberdisplays.
To erase the stored Memo Dial number:
1. CALL1+FUNCTION(MemoDial).
2. SPKtohangupwhenyouaredone.