NEC UX5000 - Ringdown

Ringdown
Page-127
Ringdown
Callaco-workeroroutsidepartybyjustliftingthehandsetonyourterminal.Thecallgoesthroughauto-
matically-thereisnoneedtodialdigitsorliftthehandset.TherearetwotypesofRingdown:Ringdown
ExtensionandExternalHotline.WithRingdownExtension,youreachanotherextension(typicallyalobby
orserviceterminal)whenyouliftthehandset.IfyourterminalhasExternalHotline,yourterminalautomat-
icallydialsaspecifiedCommonAbbreviatedDialingnumberinstead.IfyouwanteitheroftheseRingdown
optionsonyourterminal,talktoyourCommunicationsManager.
WhenauserliftsthehandsetonaRingdownExtension,theringdownoccursafteranintervalthatissetinpro-
gramming.Trytomonitorthisoperation.Iftheintervalistoolong,unauthorizedusersmayhavetimetocall
yourco-workersoruseUX5000features.(ExternalHotlinealwaysoccursassoonasyouliftthehandset.)
To use Ringdown:
1. Lifthandset.
To bypass Ringdown (for Ringdown Extension only):
1. Donotlifthandset.
2. CALL1+PlaceIntercomoroutsidecall.
OR
PressLINEforoutsidecall+Lifthandset.
OR
Lifthandset+PlaceIntercomcallbeforeRingdowngoesthrough.
To answer a call if you are a Ringdown Destination:
1. Speaktowardyourterminalifthecallvoice-announces.
OR
Lifthandsetifcallrings.