NEC UX5000 - Outside Calls, Placing

OutsideCalls,Placing
Page-105
Outside Calls, Placing
Yourterminaloffersyouseveralwaystoplaceoutsidecalls.Youcan:
• Pressalinekeyforone-buttonaccesstoaspecificline.
• Pressaloopkeyforone-buttonaccesstothefirstavailablelineinalinegroup.
• Dialacodetoselectaspecificline.
• Dialacodetoselectthefirstavailablelineinalinegroup.
• Dial9touseTrunkGroupRoutingorAutomaticRouteSelection(ARS).
ThemethodyouusedependsonhowyourUX5000andyourterminalaresetup.Forexample,ifyou
shoulduseonlyARSforoutgoingcalls,don'tpresslinekeysordialuplinesandlinegroups.Ontheother
hand,ifyourofficeissetuplikea"keysystem",youandyourco-workerswillhavelinekeysforthesame
outsidelines.YourCommunicationsManagercantellyouwhichmethodsyoushoulduseforplacingout-
sidecalls.
To place an outside call using a line key:
1. LINE.
YoumayhavetopressSPKorliftthehandsetbeforepressingthelinekey.Thelinekeylights
(green).
WiththeDESI-Lessterminals,theLine/Loopkeyscanbedisplayedononeoffourdisplay
pages.Todisplaythepagewiththeringingline/loop,usetheScrollkeyontheDESI-Lesstouch
screentochangepages(however,inmostcases,youcansimplyliftthehandsettoanswerthe
call).(Refertothepictureonpage170fortheScrollkeylocation.)
2. Listenfordialtone.
3. Dialnumber.