NEC UX5000 - Checking the UX Mail LEDs

CallForwarding
Page-17
To activate or cancel Call Forwarding:
1. CALL1+*2.
OR
FUNCTION(CallForwardtoStation).
2. DialCallForwardingcondition:
1=PersonalAnsweringMachineEmulation(thenskiptostep4)
2=Busyornotanswered
4=Immediate
6=Notanswered
7=Immediatewithsimultaneousringing(notforVoiceMail)
0=Cancel
3. Dialdestinationextension,VoiceMailmasternumberorpressVoiceMailkey.
YoucannotforwardtoaDepartmentGrouppilotnumber.Onceyouforward,onlythedestination
usercanplaceanIntercomcalltoyou.
4. DialCallForwardingtype:
2=Allcalls
3=Outsidecallsonly
4=Intercomcallsonly
5.
SPKtohangup(ifyoudialed*2instep1).
YourDNDorCallForwarding(Station)ProgrammableFunctionKeyflasheswhenCallForward-
ingisactivated.