NEC UX5000 - Page 34

CallerID
Page-28
4. PresstheABBSoftKey.
5. PresstheABBCorABBGSoftKey.
6. DialtheAbbreviatedDialbininwhichthenumberistobestored.
IfyoupressHOLD,thenextavailableAbbreviatedDialbinwillbeused.
IfallAbbreviatedDialbinsareused,thedisplayshows“TABLEISFULL”.
7. HOLD.
8. Enterthenametobeassociatedwiththestorednumber.
Forinformationonenteringnames,refertotheNameStoringfeature.
Namescanbeupto12digitslong.
9. HOLD.
10. SPKtohang up.
To store a Caller ID number in a Personal Abbreviated Dial bin:
RefertoCentralTelephoneBook(page38)fordetailsonstoringaCallerIDnumberinthebook.
YoucanstoretheCallerIDdataintheUX5000'sAbbreviatedDialTableorinoneofyourextension'sPer-
sonalAbbreviatedDialbins.Eachextensionhas10binsforpersonalstorage.
1. Withakeysetinanidlecondition,presstheLISTSoftKey.
2. PresstheCIDSoftKey(CallerID).Thedisplayshows:
##:xxxxxxxxxxxxx
mm-ddhh:mm


 

 StoreDEL