NEC UX5000 - Page 44

CentralTelephoneBook
Page-38
Register a Caller ID or Last Number Redial to the Central Telephone Book:
WhilereviewingtheCallerIDorLNDlist,ausercanaddarecordintotheCentralTelephone
Bookwiththefollowingoperation.ThisfunctioncanonlybeperformediftheCentralTelephone
Bookisunlocked.
1. Fromanidlekeyset,pressSoftKey1forList.
2. ForLastNumberRedial:
PressSoftKey1(Redial).
OR
ForCallerID:
PressSoftKey2(CID).
3. Usethe

and

SoftKeystodisplaythedesirednumber.
4. PressSoftKey3(Store).
5. PressSoftKey
3(TELBK).
6. YoumayneedtopressSoftKey1or2toselecttheTelephoneBooktobeused.
7. Toenter/changethename,pressHOLD+enterthenewname.PressHOLD.
8. Enterthegroup number.PressHOLD,thenusingthedialpad,selectthegroupnumbertobeassigned.
Thedisplayflashesthesavedtelephonenumber-pressHOLD.Youcannowchangethetelephone
number,thenpressHOLD.AttheENTERREGISTMEMORYdisplay,pressHOLD.Selectthenew
memorynumbertobeusedforthenumberandpressHOLD.Ifthememorynumberselectedwas
alreadydefined,pressSoftKey3tooverwritethecurrentinformationorpressSoftKey4tocanceland
allowyoutoselectanewmemorynumber.YoucannowselectanewentrytoeditorpressCONFto
backupthedisplayedwindow.