NEC UX5000 - Page 60

DisplayAdjustment
Page-54
:ThefirstoneisCallerIDMissedCallHistory.WithCallerIDenabled,thisicondisplays
whenanoutsidecallisnotanswered.CheckingCallHistory(bypressingLIST-CID)willremove
theiconfromthedisplay.(TheCallHistorycanalsobeaccessedbypressingthecircularbuttonin
thecenteroftheNavigationPad.)
:Thesecondoneisforanewvoicemailmessage.Oncethemessage(s)havebeenlis-
tenedto,theiconwillberemoved.
:ThethirdoneisforBluetoothconnectivity.ItwillbedisplayedwheneveraBluetooth
deviceisconnected.
Youcanchangethecontrastofthedisplayaswellasthelanguageusedwhendisplayingtheprompts.
To adjust contrast:
1. OnanidleterminalwithnoBGM,pressVOL DOWNorVOL UP.
PressingeithervolumekeyadjuststheLCDdisplay.
IfBGMisenabledfortheterminal,inordertochangethecontrast,itmustfirstbedisabled
(CALL+825)oritwilladjustthespeakervolume.