EasyManuals Logo
Home>NETGEAR>Switch>GS308T

NETGEAR GS308T User Manual

NETGEAR GS308T
351 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #202 background imageLoading...
Page #202 background image
Manage Device Security
202
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
Modify the Settings for a RADIUS Authentication Server on the Switch
 To modify the settings for a RADIUS authentication server on the switch:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 11.
Your web browser might display a security message, which you can ignore. For more
information, see
Access the Local Browser Interface on page 19.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
Access Retransmissions The number of RADIUS access-request packets retransmitted to this server.
Access Accepts The number of RADIUS access-accept packets, including both valid and
invalid packets, that were received from this server.
Access Rejects The number of RADIUS access-reject packets, including both valid and invalid
packets, that were received from this server.
Access Challenges The number of RADIUS access-challenge packets, including both valid and
invalid packets, that were received from this server.
Malformed Access Responses The number of malformed RADIUS access-response packets received from
this server. Malformed packets include packets with an invalid length. Bad
authenticators or signature attributes or unknown types are not included in
malformed access-responses.
Bad Authenticators The number of RADIUS access-response packets containing invalid
authenticators or signature attributes received from this server.
Pending Requests The number of RADIUS access-request packets destined for this server that
did not yet time out or receive a response.
Timeouts The number of authentication time-outs to this server.
Unknown Types The number of RADIUS packets of unknown type that were received from this
server on the authentication port.
Packets Dropped The number of RADIUS packets received from this server on the
authentication port and dropped for some other reason.
Table 46. RADIUS authentication server statistics information (continued)
Field Description

Table of Contents

Other manuals for NETGEAR GS308T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS308T and is the answer not in the manual?

NETGEAR GS308T Specifications

General IconGeneral
Switch typeManaged
Switch layerL2
Quality of Service (QoS) supportYes
Master (outer) case width214 mm
Master (outer) case height312 mm
Master (outer) case length474 mm
Master (outer) case weight6110 g
Harmonized System (HS) code85176990
Quantity per master (outer) case6 pc(s)
Package typeBox
Package depth270 mm
Package width226 mm
Package height64 mm
Package weight750 g
Cables includedAC
Power connectorDC-in jack
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity8
StackableNo
Product colorBlack
LED indicatorsActivity, Link, Power
Country of originChina
10G support-
Multicast protocolsIGMP
Input current1 A
DC input voltage12 V
MAC address table- entries

Related product manuals