Configure Switching
112
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
You can define VLAN groups stored in the VLAN membership table. The switch supports up
to 64 VLANs.
The following VLANs are preconfigured on the switch and you cannot delete them:
• VLAN 1.
The default VLAN of which all ports are members.
• VLAN 2.
The default Auto-VoIP VLAN. By default, this VLAN does not include any
members but you can manually add members.
• VLAN 4089.
The Auto-Video VLAN. By default, this VLAN does not include any members
but you can manually add members.
Configure VLAN Settings
You can configure the various VLAN settings.
Add a VLAN
To add a VLAN:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 11.
Your web browser might display a security message, which you can ignore. For more
information, see Access the Local Browser Interface on page 19.
The login window opens.
4. Enter the switch’
s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching> VLAN > Basic > VLAN Configuration.
To Next Page
Loading...
