NETGEAR GS310TP

Specifications and Default Settings
342
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
General Feature Default Settings
The following table describes the general feature default settings.
RADIUS-assigned VLANs Disabled
Multiple Spanning Tree Disabled
Link aggregation No link aggregation groups (LAGs) configured
LACP system priority 32768
DiffServ Enabled
IGMP snooping Disabled
IGMP snooping querier Disabled
Table 66. General feature default settings
Feature Name/Setting Default
Virtual LAN (IEEE 802.1Q)
Default VLANs • 1 (Default). All ports are members.
• 2 (Auto-VoIP). No ports are members.
• 4089 (Auto-Video). No ports are members.
PVID 1
Acceptable Frame Types Admit All
Ingress Filtering Disabled
Port Priority 0
Jumbo Frames
Frame Size 1522
Flow Control
Admin Mode Disabled
802.1X
Port Based Authentication State Disabled
VLAN Assignment Mode Disabled
Dynamic VLAN Creation Mode Disabled
EAPOL Flood Mode Disabled
Table 65. Switch default settings (continued)
Feature Default