Configure Switching
127
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
Your web browser might display a security message, which you can ignore. For more
information, see Access the Local Browser Interface on page 19.
The login window opens.
4. Enter the switch’
s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching >
Auto-VoIP > Protocol-based > Port Settings.
6. From the Prioritization Type menu, select Traffic Class or Remark.
This selection specifies the type of prioritization.
7. From the Class V
alue menu, specify the CoS class value to be reassigned for packets that
the voice VLAN receives.
8. Click the Apply button.
Your settings are saved.
Configure Auto-VoIP OUI-Based Properties
With Organizationally Unique Identifier (OUI)–based Auto-VoIP, voice prioritization is
provided based on OUI bits.
To configure Auto-VoIP OUI-based properties:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
To Next Page
Loading...
