NETGEAR GS310TP

Manage Device Security
274
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
8. Click the Delete button.
The rule is removed.
Configure IP ACL Interface Bindings
When you bind an IP ACL to an interface, all the rules that you defined for the IP ACL are
applied to the selected interface.
If resources on the switch are insufficient, an attempt to bind an ACL to an interface fails.
 To bind an IP ACL to one or more interfaces:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 11.
Your web browser might display a security message, which you can ignore. For more
information, see Access the Local Browser Interface on page 19.
The login window opens.
4. Enter the switch’
s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security
> ACL > Advanced > IP Binding Configuration.