Manage Device Security
221
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
The file transfer starts. A status message displays during the transfer and upon
successful completion of the transfer.
Manage Access Control to the Switch
Access control allows you to configure a profile and set rules for access to the local browser
interface, access by SNMP stations, and client access to a TFTP server.
Configure an Access Control Profile
You can set up a security access profile with which you can associate an access rule
configuration.
To configure an access profile:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 11.
Your web browser might display a security message, which you can ignore. For more
information, see Access the Local Browser Interface on page 19.
The login window opens.
4. Enter the switch’
s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security
> Access > Access Control > Access Profile Configuration.
6. In the Access Profile Name field, enter the name of the access profile to be added.
The maximum length is 32 characters.
To Next Page
Loading...
