EasyManua.ls Logo

NETGEAR GS310TP

NETGEAR GS310TP
351 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications and Default Settings
349
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
Traffic Control Settings
The following table describes the traffic control settings.
Table 69. Traffic control settings
Feature Sets Supported Default
Storm control All ports Disabled
Jumbo frame All ports 1522
Max = 10000 bytes
Quality of Service Settings
The following table describes the Quality of Service settings.
Table 70. Quality of Service settings
Feature Sets Supported Default
Number of queues 8 N/A
802.1p 1 Enabled
DSCP 1 Disabled
Egress Rate limiting All ports Disabled
Security Settings
The following table describes the security settings.
Table 71. Security settings
Feature Sets Supported Default
802.1X All ports Disabled
MAC ACL 50 (100 ACLs in total, shared with
IP ACLs)
All MAC addresses allowed
IP ACL 50 (100 ACLs in total, shared with
MAC ACLs)
All IP addresses allowed
Password control access 1 Idle timeout = 5 mins.
Password = password
Management security 1 profile with 20 rules for
HTTP/HTTPS/SNMP access to
allow/deny an IP address/subnet
All IP addresses allowed
Port MAC lock down All ports Disabled

Table of Contents

Other manuals for NETGEAR GS310TP

Related product manuals