Get Started
16
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
WARNING:
When you change the IP address of your computer, you lose your
connection to the rest of the network. Be sure to write down your
current network address settings before you change them.
7. Click the OK button.
8. Close all other pop-up windows.
To configure a static address on the switch:
1. Use a straight-through cable to connect the Ethernet port on the computer directly to
any port on the switch.
2. Open a web browser on your computer and connect to the local browser interface.
For more information, see Access the Local Browser Interface on page 19.
3. Change the network settings on the switch to match those of your network.
For more information, see Configure the IP Network and VLAN Settings for the Local
Browser Interface on page 38.
After you change the network settings on the switch, return the network configuration on your
computer to the original settings.
To Next Page
Loading...
