NETGEAR GS310TP

Manage Device Security
200
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
9. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable fields displayed on the page.
Table 45. RADIUS Configuration information
Field Description
Current Server IP Address The IP address of the current server. This field is blank if no servers are
configured.
Number of Configured
Servers
The number of configured authentication RADIUS servers. The value can range
from 0 to 3.
Configure a RADIUS Authentication Server on the Switch
You view and configure various settings for a RADIUS server configured on the switch.
Add a Primary RADIUS Authentication Server to the Switch
 To add a primary RADIUS authentication server to the switch and view or reset the
RADIUS authentication server statistics:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 11.
Your web browser might display a security message, which you can ignore. For more
information, see Access the Local Browser Interface on page 19.
The login window opens.
4. Enter the switch’
s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Management Security > RADIUS > Server Configuration.