Manage Device Security
246
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 11.
Your web browser might display a security message, which you can ignore. For more
information, see Access the Local Browser Interface on page 19.
The login window opens.
4. Enter the switch’
s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security
> ACL > ACL Wizard.
The previous figure shows the ACL Wizard for model GS310TP.
6. From the ACL T
ype menu, select the type of ACL.
You can select from the following ACL types:
• ACL Based on Destination MAC. Creates an
ACL based on the destination MAC
address, destination MAC mask, and VLAN.
• ACL Based on Source MAC. Creates an
ACL based on the source MAC address,
source MAC mask, and VLAN.
• ACL Based on Destination IPv4. Creates an
ACL based on the destination IPv4
address and IPv4 address mask.
• ACL Based on Source IPv4. Creates an
ACL based on the source IPv4 address and
IPv4 address mask.
To Next Page
Loading...
