3.55 EDH0162En1040 – 06/99
MM4005 FD — Display function keys
Usage IMM PGM MIP
Syntax FD
Parameters
None.
Description This command displays the function keys defined with the FB command. It
is intended to be used in conjunction with the FB, FC and WF commands to
allow the user to build front panel interactive programs.
NOTE
The command is valid only in programming mode, applying only to the
custom defined function keys, not the ones used by the normal operation
of the controller.
Returns
None.
Errors A — Unknown message code.
J — Command authorized only in programming mode.
Rel. Commands FB — Label function key.
FC — Clear function key line.
WF — Wait for function key.
Example 3XX | Clear program #3 from memory, if any.
3EP | Activate program mode and enter following commands as program
#3.
4FBSTOP | Define custom label for function key #4 as STOP.
… |
… |
… |
FD | Display the custom function key label(s) (STOP).
… |
… |
… |
FC |
Clear function key display line.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
