Newport XPS Programmer's Manual

XPS Unified Programmer’s Manual
7.2.1.117 INTServitudesStatusGet
Name
INTServitudesStatusGet– Reads INT servitudes status.
Input tests
- Refer to section 7.1: “Input Tests Common to all XPS Functions”.
Description
This function returns the INT servitudes status register value.
Prototype
int INTServitudesStatusGet(
int SocketID,
short * INTServitudesStatus
)
Input parameters
SocketID int Socket identifier gets by the
“TCP_ConnectToServer” function.
Output parameters
INTServitudesStatus short * INT servitudes status.
Return (In addition to the results of “Input Tests Common to all XPS
Functions”)
• 0: No error.
• -8: Wrong object type for this command.
• -126: Wrong parameter type in the command string: short or short * expected.
EDH0373En1023 — 01/18 180

Newport XPS Specifications

General

Controller Type	Multi-axis motion controller
Power Supply	24 VDC
Communication Interface	Ethernet
Programming Language	C, C++, .NET, LabVIEW
Supported Motor Types	Stepper
Operating System Compatibility	Windows
Axes	Up to 8 axes