Newport XPS Programmer's Manual

XPS Unified Programmer’s Manual
7.2.1.237 PositionerDriverStatusStringGet
Name
PositionerDriverStatusStringGet – Gets the positioner driver status description.
Input tests
- Refer to section 7.1: “Input Tests Common to all XPS Functions”.
Description
This function returns a driver status description from a positioner driver status code.
NOTE
See section 8.7: “Positioner Driver Status List”.
Prototype
int PositionerDriverStatusStringGet(
int SocketID,
int DriverStatusCode,
char * DriverStatusString
)
Input parameters
SocketID int Socket identifier gets by the
“TCP_ConnectToServer” function.
DriverStatusCode unsigned long Driver status code.
Output parameters
DriverStatusString char * Driver status description.
Return (In addition to the results of “Input Tests Common to all XPS
Functions”)
• 0: No error.
EDH0373En1023 — 01/18 368

Newport XPS Specifications

General

Controller Type	Multi-axis motion controller
Power Supply	24 VDC
Communication Interface	Ethernet
Programming Language	C, C++, .NET, LabVIEW
Supported Motor Types	Stepper
Operating System Compatibility	Windows
Axes	Up to 8 axes