Newport XPS Programmer's Manual

XPS Unified Programmer’s Manual
7.2.1.365 XYGroupPositionCorrectedProfilerGet
Name
XYGroupPositionCorrectedProfilerGet – Gets the corrected profiler position for all
positioners of an XY group.
Input tests
- Refer to section 7.1: “Input Tests Common to all XPS Functions”.
- Valids object type: (-8)
- Valids group type (must be an XY group): (-18)
- Valids group name: (-19)
Description
This function gets the corrected position which is the theoretical position recalculated
with the XY mapping correction.
This function applies the XY mapping on the theoretical user-defined positions and
returns the corrected positions.
Prototype
int XYGroupPositionCorrectedProfilerGet(
int SocketID,
char * GroupName,
double PositionX,
double PositionY,
double * CorrectedPositionX,
double * CorrectedPositionY
)
EDH0373En1023 — 01/18 530

Newport XPS Specifications

General

Controller Type	Multi-axis motion controller
Power Supply	24 VDC
Communication Interface	Ethernet
Programming Language	C, C++, .NET, LabVIEW
Supported Motor Types	Stepper
Operating System Compatibility	Windows
Axes	Up to 8 axes