Newport XPS Programmer's Manual

XPS Unified Programmer’s Manual
7.2.2.48 ZygoGetPEGLastCommunicationTime
Name
ZygoGetPEGLastCommunicationTime – Gets the last communication time to
configure Zygo PEG.
Input tests
- Refer to section 7.1: “Input Tests Common to all XPS Functions”.
- Checks the XPS controller configuration: (-4)
Description
This function gets the last communication time to configure Zygo PEG in seconds.
Prototype
int ZygoGetPEGLastCommunicationTime(
int SocketID,
double * LastCommunicationTime,
)
Input parameters
SocketID int Socket identifier gets by the
TCP_ConnectToServer” function.
ParamName double * Last communication time to configure PEG (s).
Output parameters
None.
Return (In addition to the results of “Input Tests Common to all XPS
Functions”)
• 0: No error.
• -4: Unknown command.
EDH0373En1023 — 01/18 646

Newport XPS Specifications

General

Controller Type	Multi-axis motion controller
Power Supply	24 VDC
Communication Interface	Ethernet
Programming Language	C, C++, .NET, LabVIEW
Supported Motor Types	Stepper
Operating System Compatibility	Windows
Axes	Up to 8 axes