Newport XPS Programmer's Manual

XPS Unified Programmer’s Manual
7.2.1.284 PositionerSGammaExactVelocityAjustedDisplacementGet
Name
PositionerSGammaExactVelocityAjustedDisplacementGet – Gets the adjusted
displacement to get exact velocity.
Input tests
- Refer to section 7.1: “Input Tests Common to all XPS Functions”.
- Checks the profiler type (must be “SGamma”): (-8)
- Checks the positioner type (must not be a secondary positioner): (-8)
Description
This function returns the closest optimum displacement to obtain the most precise
velocity during the displacement.
Prototype
int PositionerSGammaExactVelocityAjustedDisplacementGet(
int SocketID,
char * FullPositionerName
double DesiredDisplacement,
double * AdjustedDisplacement
)
Input parameters
SocketID int Socket identifier gets by the
“TCP_ConnectToServer” function.
FullPositionerName char * Positioner name.
DesiredDisplacement double Desired displacement (units).
Output parameters
AdjustedDisplacement double * Ajusted displacement (units).
Return (In addition to the results of “Input Tests Common to all XPS
Functions”)
• 0: No error.
• -8: Wrong object type for this command.
EDH0373En1023 — 01/18 426

Newport XPS Specifications

General

Controller Type	Multi-axis motion controller
Power Supply	24 VDC
Communication Interface	Ethernet
Programming Language	C, C++, .NET, LabVIEW
Supported Motor Types	Stepper
Operating System Compatibility	Windows
Axes	Up to 8 axes