Newport XPS Programmer's Manual

XPS Unified Programmer’s Manual
Return (In addition to the results of “Input Tests Common to all XPS
Functions”)
• 0: No error.
• -8: Wrong object type for this command.
• -18: Positioner Name doesn't exist or unknown command.
• -22: Not allowed action.
• -61: Error file corrupt or file doesn't exist.
• -121: Function is not allowed due to configuration disabled.
• -122: Data incorrect (wrong value, wrong format, wrong order or inexistent).
229 EDH0373En1023 — 01/18

Newport XPS Specifications

General

Controller Type	Multi-axis motion controller
Power Supply	24 VDC
Communication Interface	Ethernet
Programming Language	C, C++, .NET, LabVIEW
Supported Motor Types	Stepper
Operating System Compatibility	Windows
Axes	Up to 8 axes